Yellow Jacket 2M Competition GS-F5 Electric

$225.00

Yellow Jacket 2M Competition GS – F5 Electric

Out of stock

Category:

Description

The Competition GS Wing has a new planform as its more elliptical, lower EDA, with longer mid and short tip panels.  It also features a lower only trailing edge that is scalloped.  It also has more wing area than the standard and lite wings.  The V-Tail is offered with this wing as it provides the banking angles that result in low side slip drag.  The V-Tail is mounted on CF pegs and the boom comes pre drilled.

Note: The GS V Tail now comes with airfoil V Tails that build in a fixture.  The new tails are very efficient, they are lighter and allow the CG to move approximately 1/4″ further back than the original design.

This is the lightest 2M offered and has the least amount of drag.  It also builds the fastest and it has proven itself to be very strong.

  • AG35-AG38 Airfoils
  • Three Piece Wing
  • Removable V-Tail
  • Carbon Fiber Spars, Leading Edge, and Tailboom
  • Wing Span 78.5″ Length 45″
  • Wing Area 562 Sq In
  • Wing Loading 4.35 oz/ft at 17.0 oz Total AUW

Contents

The kit contains the materials and instructions to build the complete structure.  Adhesives, covering, and basic tools, electrical components are not included.  All laser cut parts are completely cut out and grouped so the builder does not have to cut parts from a sheet.  Parts are organized to simplify preparation and assembly.

Wing

Full size build plan with instructions printed on the plan

All ply and balsa ribs

Wing tips

All Carbon Fiber Tubes and Rods

Aluminum Joiner tubes for the 3 piece wing

Laser cut trailing edge

Nylon wing hold down bolts

Angle tool used for sanding angles in the joiner ribs and tips

Fuse

8.5 x 11 inch instruction sheet – Full size is not necessary but PDF is available by request

All plywood and balsa for the pod, tail set, and stabilizer mount

Tapered Carbon Fiber Boom

PTFE Bondable tubing for the push rods-6 ft length.

.025 Music Wire push rods

Blind nuts for wing mounting

Greg McGill Build Thread on F3RES Version

https://www.rcgroups.com/forums/showthread.php?3500223-Yellow-Jacket-GS-Build-Log

Additional information

Weight 38 oz
Dimensions 36 × 6 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.