Below are links to components I recommend for the power system in the electric fuse. These are great quality components at very reasonable prices. Using these specific parts makes it possible to balance the glider with no added weight to achieve the lightest structure. Should you decide to use heavier components the motor mount can be moved rearward to compensate.
Aloft Hobbies has setup component pages for each model and is working on increasing inventory. 4/9/2020
https://alofthobbies.com/yellow-jacket-2m-f5-electric-flight-pack.html
Electric Components
This should be everything you need except the heat shrink
Motor, notice the mounting holes in the rear:
https://hobbyking.com/en_us/turnigy-aerodrive-sk3-2826-980kv-brushless-outrunner-motor-1.html
Electric Speed Controller 20A
Batteries
https://hobbyking.com/en_us/turnigy-nano-tech-460mah-3s-25-40c-lipo-pack.html
Bullet Connectors
https://hobbyking.com/en_us/3-5mm-3-wire-bullet-connector-for-motor-5pairs-bag.html
Connector Pin Set
https://hobbyking.com/en_us/jst-male-2-pin-connector-set-10pcs-set.html
Motor Mounting Bolts
https://hobbyking.com/en_us/metal-socket-head-machine-hex-screw-m3x6-10pcs-set.html
I am using this spinner and yoke from Esprit Model, Kind of pricey but I like it works well
http://www.espritmodel.com/aeronaut-white-turbo-spinners-for-folding-propellers.aspx
| Folding Spinner Size | Diameter | Shaft |
| Folding Turbo 30/3/8 w/Yoke | 30mm | 3mm |
Prop also from Esprite
| Aeronaut 9 x 6 | 16,000 |
